You must be at least 18 years old to enter.


Some products on this site contain nicotine. By entering this site, you are confirming that you are at least 18 years of age or 21 years of age where applicable.

Sorry Adults Only

Aspire Cygnet 80W Mod

The Aspire Cygnet 80W mod is powered by a single replaceable 18650 battery with a maximum wattage output of 80 watts. The Cygnet is compact, portable and supports Variable Voltage, variable Wattage and Bypass modes. It's simple in design but the functionality there is all there. This mod can accommodate a majority of tanks with minimal to no overhang. The Cygnet will fire at resistances between 0.1 and 3.5ohms and features a 0.86 inch OLED screen with a micro USB charging port. It also has a stainless steel flush mounted spring loaded 510 connector. As usual, Aspire has included a ton of safety features such as automatic cutoff, over discharge protection, overcharge protection, over heat protection, short circuit protection and battery reverse protection.
SKU: ASP-MOD-CYGNET-80W
Free shipping for orders over $1,000.00

Details

Details

Specifications: 

  • Height: 72mm
  • Width: 45mm
  • Thickness: 23.5mm
  • Wattage Range: 1W - 80W
  • Voltage Range: 0.5V - 0.8V
  • Resistance Parameter: 0.1ohm - 3.5ohm
  • 0.86 Inch OLED Screen
  • Supports Variable Voltage, Variable Wattage and Bypass Modes
  • Spring Loaded 510 Connector
  • Micro USB Port
  • Battery Cap
  • Automatic Cutoff
  • Over Discharge Protection
  • Short Circuit Protection
  • Battery Reverse Protection
  • Over Head Protection
  • Overcharge Protection

Includes: 

  • 1x Aspire Cygnet Mod
  • 1x USB Cable
  • 1x Warranty Card
  • 1x User Manual

· Do not use or charge with non-approved devices. Overuse of vaping apparatus may cause this product to overheat, malfunction, and/or cause burns or other physical injury.

· Do not leave this product unattended while charging, and do not charge it in your vehicle.

· Do not modify or attempt to disassemble this product. Use accordingly.

· Always turn off your vaping apparatus in between uses.

· Do not attempt to fix, correct, replace, or install any part of the vaping apparatus.

· Electronic cigarettes, personal vaporizers, and e-liquids are not approved by the FDA.

· We DO NOT recommend building/wrapping a coil lower than 0.3Ω in resistance.

· Cease the use of any equipment if there are any slight indications of malfunction.

· Mechanical mods and hybrid connection mods are advanced user items. Please understand all safety procedures before attempting to use.

· WARNING: Some tanks are made from polycarbonate and is not suitable for e-liquid use as some flavors might affect its structural integrity causing it to craze or crack. Please check and see if your tank is made from a suitable material (like glass, Pyrex, stainless steel, etc.) when using citrus, cinnamon, and tea flavors.

Policies

This is Policies tab content